Dap Weldwood Contact Cement

Dap 107 3-Ounce Weldwood Contact Cement

• • Stir Contact Cement thoroughly with a standard paint paddle or stirring stick.
  • Pre-fit all parts before applying Contact Cement.
  • Both surfaces must be clean, dry and free of foreign material. Painted or non-porous surfaces must be roughened before adhesive is applied.
  • Using a paint brush, short nap roller or finishing trowel, apply an even coat of adhesive to both surfaces.
  • Allow both surfaces to dry 15 to 20 minutes (dependent on temperature and humidity). Dry Contact Cement will feel tacky and appear glossy.
  • Align surfaces into exact position and press together, moving from one end to the other to avoid bubbles.
  • No clamping required. Contact Cement bonds permanently when sufficient pressure is applied and reaches maximum holding strength in 7 days.

  This product is a 3Oz Bott Contact Cement

• Purpose of use for Caulk & Sealants, contact-cements
• Manufactured in China
• Bonds instantly and permanently on contact
• Resists water and most chemicals
• Recommended for applying plastic laminates, such as Micarta, to counter tops